Requirements
In order to test this design on hardware, you will need the following:
Vivado 2024.1
PetaLinux Tools 2024.1
One of the supported carrier boards listed below
List of supported boards
Zynq UltraScale+ boards
Carrier board |
Supported FMC connector(s) |
---|---|
HPC |
|
HPC0 HPC1 |
|
LPC |
|
HPC0 |
|
FMCP |
|
FMCP |
|
FMCP |
Versal boards
Carrier board |
Supported FMC connector(s) |
---|---|
FMCP1 FMCP2 |
|
FMCP |
|
FMCP |
|
FMCP1 FMCP2 |
|
FMCP |
|
FMCP |
For list of the target designs showing the number of ports supported, refer to the build instructions.