Troubleshooting

Build failures

Check the following if the project fails to build or generate a bitstream:

  1. Are you using the correct version of Vivado for this version of the repository?
    Check the version specified in the Requirements section of the README.md file. Note that this project is regularly updated and you may have to refer to an earlier commit of this repo if you are using an older version of Vivado.

  2. Did you correctly follow the build instructions?
    Please check the build instructions carefully as you may have missed a step.

  3. Did you copy/clone the repo into a short directory structure?
    Windows doesn’t cope well with long directory structures, so copy/clone the repo into a short directory structure such as C:\projects\. When working in long directory structures, you can get errors relating to missing files, particularly files that are normally generated by Vivado (FIFOs, etc).

PetaLinux issues

Ports not working

Check the following if you are unable to get ports working in PetaLinux.

  1. Check the interface-to-port assignment for your design
    The assignment of interfaces (eg. eth0, eth1, eth2, etc) to ports (eg. Ethernet FMC Max port 0, 1, 2 and 3) is specific to the design that you are using. The interface to port assignment is documented here.

  2. Each port must be assigned to a different subnet
    If you assign interface eth0 to IP address 192.168.1.10, then you must use a different subnet for the IP address of eth1, eth2 and eth3. Multiple ports that are managed under Linux must be assigned to different subnets, or they will not work. An example address assignment would be eth0=192.168.1.10, eth1=192.168.2.10, eth2=192.168.3.10, eth3=192.168.4.10.

Dropped pings/packets

No dropped packets are to be expected with our example designs. If you are experiencing dropped packets of any kind, please ensure that you have no timing errors or critical warnings in the Vivado design.

We ensure that there are no timing errors or issues on all of our designs before making a release, so typically this problem occurs on custom designs where the timing issues have not yet been optimized. Please contact us for support if you are experiencing dropped packets.